Canon imagePROGRAF PRO-6100S series User Manual Win - Page 658

Color Mode Select the color to print. Color Prints with the number of colors in the document. Monochrome Select this setting to print a line drawing using black ink. Monochrome (Photo) Continuous tones of color documents are reproduced using gray halftones. Color Settings Opens the Color Settings dialog box. You can adjust individual color settings such as Cyan, Magenta, Yellow, Brightness, and Contrast on the Color Adjustment tab, and select the Color Correction method on the Matching tab. Thicken Fine Lines Prints thin lines thicker for easier viewing. Preview before printing You can start up the Canon imagePROGRAF Preview, and check what the printing results will be before executing the print. Check this check box to display a preview before printing. Status Monitor... Displays the status monitor. About Opens the About dialog box. You can check information such as the version and copyright of the printer driver. Defaults Restores all the settings you have changed to their default values. Clicking this button restores all the settings on the current screen to their default values (factory settings). Paper Detailed Settings dialog box Drying Time Wait time can be set to allow ink to dry. Between Pages settings are only enabled for roll paper. Between Pages The wait time until outputting paper can be set after printing one page. Time is taken before cutting roll paper to allow the ink to dry, so even when Automatic Cutting in the Roll Paper Options dialog box of the Page Setup tab is set to Yes, page may be dropped into the basket with dried ink. Printer Default Settings in printer unit operation panel are applied. None Page will be output immediately after printing 30sec. / 1min. / 3min. / 5min. / 10min. / 30min. / 60min. Page will be output after set amount of time has passed after printing. 658