Canon imagePROGRAF PRO-6100S series User Manual Win - Page 93
Manual for paper of which the leading edge rubs the printhead
View all Canon imagePROGRAF PRO-6100S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
11. Tap OK. After the roll is rewound, it stops automatically. Manual (for paper of which the leading edge rubs the printhead) Note • Once the following step has been performed, the procedure can be started from step 8 the next time. • Printing the second and subsequent times • Printing after replacing with the same type of paper 1. Tap paper settings display area on Home screen of touch screen. Note • If the Home screen does not appear, tap the HOME button. 2. Tap paper feed slot where roll paper for which you want to set cutting method is loaded. 3. Tap Paper settings. 4. Tap Advanced. 5. Tap Cutting mode. 6. Tap User cut. 7. When Do you want to set to detect the leading edge of the paper? is displayed, select Do not detect. Note • If you set the detection of paper leading edge to Do not detect, a margin of about 4.0 inches (10 cm) is created at the paper leading edge when printing starts. 93