Canon imagePROGRAF iPF6450 User Guide - Page 1022

Cannot calibrate. iPF6450 Cannot calibrate. Cause The paper for printing a test pattern is soiled. Otherwise, you have loaded colored paper. The test pattern was printed too faintly. Direct sunlight or strong lighting may be shining on the printer and causing the sensor to malfunction. Corrective Action Press the OK button to clear the error. Load unused paper compatible with color calibration. (See Paper Reference Guide.) Press the OK button to clear the error. Take steps to remedy faint printing. (See "Printing is faint.") →P.987 Press the OK button to clear the error. Take steps to ensure the printer is not used when exposed to direct sunlight or strong lighting. Excessive temperature or humidity. Cause The temperature or humidity where the printer is installed is out of the acceptable range for operation. Corrective Action Press ▲ or ▼ to select Stop, and then press the OK button to stop printing. Use the printer under suitable environmental conditions. Also note that various environmental conditions are recommended for various types of paper. For details on the recommended environmental conditions, see the Paper Reference Guide. (See Paper Reference Guide.) Press ▲ or ▼ to select Continue, and then press the OK button to continue with color calibration. However, note that correct adjustment may not be possible. Please execute common calibration. Cause There is not even one Common calibration execution result. Note that this is displayed when all of the following are satisfied. • If Set Exec. Guide is On in the Control Panel menu. • If the printer is loaded with a type of paper on which color calibration cannot be executed. Corrective Action Execute Common calibration. (See "Color Calibration Using the Printer Sensor.") →P.826 Set Set Exec. Guide to Off on the Control Panel menu. (See "Menu Structure.") →P.657 Error Message Messages regarding printing or adjustment Please commn calibrt using above paper. Cause It is now recommended that you execute Common calibration. Note that this is displayed when Set Exec. Guide in the Control Panel menu is set to On and any of the following is true. • If the printer is loaded with a type of paper on which color calibration cannot be executed and the predefined condi- tions since executing the Common calibration the last time have been reached. • Although a media type that color calibration can be executed on is loaded in the printer, there is no record or per- forming color calibration on that media, and the designated criteria from executing Common calibration the last time have been reached. Corrective Action Execute Common calibration. (See "Color Calibration Using the Printer Sensor.") →P.826 Set Set Exec. Guide to Off on the Control Panel menu. (See "Menu Structure.") →P.657 1022 Please calibrate using above paper. Cause It is now recommended that you execute Unique calibration. Note that this is displayed when Set Exec. Guide in the Control Panel menu is set to On and any of the following is true. Corrective Action Execute Unique calibration. (See "Color Calibration Using the Printer Sensor.") →P.826 User's Guide