Canon imagePROGRAF iPF6450 User Guide - Page 666

Menu Settings iPF6450 *1: A rough estimate of the amount of ink consumed per print job is displayed. Actual ink consumption may be different. The average margin of error for estimates calculated according to Canon measurement conditions for ink costs is ±15%. Canon does not guarantee the accuracy of these estimates. Estimates may vary depending on conditions of use. Calculation of these estimates does not include ink consumed when cleaning printheads by forceful ejection of ink. Set./Adj. Menu Limited items are displayed during printing. The displayed items are indicated by annotations. Setting Item Test Nozzle Check Print ColorCheck Print (*2) Description, Instructions Print a test pattern to check the nozzles. Executes a color check on the printer using the optional Spectrophotometer Unit. Color check is a function that prints and automatically measures the colors of a test pattern, and calculates the color difference from a calibration target (standard color values registered in the printer). (See "Color Checks Using the Spectrophotometer Unit (option).") →P.835 Control Panel This is the same as ColorCheck Print in the level under Calibration in Adjust Printer. Printer Menu Status Print Print information about the setting values and condition of the printer. Interface Print Print interface settings information. Paper Details Print the paper settings as specified in Paper Details. Print Job Log Print a record of print jobs, including the paper type and size, amount of ink consumed, and so on. Ink consumption indicates a rough estimate of the amount of ink consumed per print job. (*1) Menu Map Print the menu structure. Adjust Printer Head Posi. Adj. Standard An adjustment pattern is printed and the print position is automatically adjusted to fix misaligned printing. Select Standard if vertical lines in printed material are warped or colors are out of alignment. Select Standard also if the printing results are not improved by executing Simple. (See "Automatic Adjustment to Straighten Lines and Colors.") →P.796 Simple An adjustment pattern is printed and the print position is automatically adjusted to fix misaligned printing. Simple executes a simple adjustment in a short time. Select Simple when frequently adjusting the printhead, such as during daily maintenance. (See "Automatic Adjustment to Straighten Lines and Colors.") →P.796 Other Initial adjustmt Printhead position adjustment is executed during the initial setup. If adjusting the printhead position has not been performed such as due to an error during initial setup or the state of the operating settings when replacing the printhead, select Initial adjustmt. (See "Adjustment When Installing the Printhead.") →P.800 Manual Input the setting values from the adjustment pattern printing re- sults and adjust the printing position to fix misaligned printing. 666 Normally, select Standard. However, when printing on special paper, or if printing is not improved after Standard, try Manual. (See "Manual Adjustment to Straighten Lines and Colors.") →P.798 User's Guide