Canon imagePROGRAF iPF6450 User Guide - Page 533

Handling and Use of Paper iPF6450 Loading Rolls on the Roll Holder Handling rolls Loading Rolls on the Roll Holder ...533 Loading Rolls in the Printer ...536 Changing the Type of Paper ...538 Specifying the Paper Length ...540 Removing the Roll from the Printer ...540 Removing Rolls From the Roll Holder ...542 Clearing Jammed Roll Paper ...977 Clearing Jammed Paper (Paper Feed Slot) ...976 Feeding Roll Paper Manually ...544 Keeping Track of the Amount of Roll Paper Left 544 Specifying the Ink Drying Time for Rolls ...545 Specifying the Cutting Method for Rolls ...546 Cutting the Leading Edge of Roll Paper Automatically 551 Reducing Dust from Cutting Rolls ...552 Roll Holder Set ...553 Removing the Roll Feed Unit ...553 Installing the Roll Feed Unit ...554 Lowering the Up-down Unit of the Spectrophotometer Unit (option) Manually 555 Loading Rolls on the Roll Holder When printing on rolls, attach the Roll Holder to the roll. Rolls have a two- or three-inch paper core. Use the correct attachment for the paper core. The printer comes equipped with the 2-Inch Paper Core Attachment installed. For borderless printing on A1 (594 mm) or A2 (420 mm) rolls, attach the included Spacer for Borderless Printing to the Roll Holder. Using Rolls with a 2-inch Paper Core Holder Stopper Roll Holder Side Using Rolls with a 3-inch Paper Core Holder Stopper Roll Holder Side For 2-inch paper cores No Attachment Needed For 3-inch paper cores 3-Inch Paper Core Attachment Handling rolls • Set the roll on a table or other flat surface so that it does not roll or fall. Rolls are heavy, and dropping a roll may cause injury. Caution 533 User's Guide