Canon imagePROGRAF iPF6450 User Guide - Page 541

Handling and Use of Paper iPF6450 Removing the Roll from the Printer • If you need to cut the roll, see "Specifying the Cutting Method for Rolls." →P.546 Note • The operations for a printer with a Spectrophotometer Unit (option) are the same as for a printer with no Spectrophotometer Unit (option). If it is difficult to perform operations from the front of the printer, lower the Up-down Unit. (See "Lowering the Updown Unit of the Spectrophotometer Unit (option) Manually.") →P.555 1 On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se- lect the (Paper tab) . • If the Tab Selection screen is not displayed, press the Menu button. Note 2 Press the OK button. The Paper Menu is displayed. 3 Press ▲ or ▼ to select Eject Paper, and then press the OK button. 4 Press ▲ or ▼ to select "Yes", and then press the OK button. The roll is rewound. • If you have selected ManageRemainRoll > On in the Control Panel menu, a barcode is printed on the leading edge of the Important roll. Do not remove the roll before the barcode is printed. You will be unable to keep track of the amount of roll paper left. (See "Keeping Track of the Amount of Roll Paper Left.") →P.544 5 Open the Roll Feed Unit Cover. Handling rolls 6 Using both hands, rotate the Roll Holder toward the back to rewind the roll. 541 User's Guide