Canon imagePROGRAF iPF6450 User Guide - Page 977

iPF6450 5 Fold an A4 sheet lengthwise four times and insert it through the gap of the Back Cover. Push the scrap out toward the Platen. Clearing Jammed Roll Paper 6 Remove the scrap when it is pushed out onto the Platen. 7 If any scraps remain inside the paper feed slot, repeat steps 5 and 6. 8 Close the Top Cover. 9 Turn the printer off. (See "Turning the Printer On and Off.") →P.23 Clearing Jammed Roll Paper If paper from a roll becomes jammed, "Paper jam" is shown on the Display Screen of the Control Panel. Remove the jammed paper as follows. • For instructions on removing scraps from the paper feed slot after clearing jammed roll paper, see "Clearing Jammed Paper Important (Paper Feed Slot)." →P.976 1 Open the Roll Feed Unit Cover. Use commercially available scissors or the like to cut the paper of the loaded roll. Troubleshooting Problems Regarding Paper • When cutting paper, be careful to avoid injury or damage to the printer. Caution • If it is difficult to perform operations from the front of the printer, perform operations from the back of the printer. Note If the printer has a Spectrophotometer Unit (option), lowering the Up-down Unit makes it easier to perform operations from the front of the printer. (See "Lowering the Up-down Unit of the Spectrophotometer Unit (option) Manually.") →P.555 977 User's Guide