Canon imagePROGRAF iPF6450 User Guide - Page 602

Warnings (Windows) 3 Load the custom paper into the printer and click the Execute button in Create Calibration Target. iPF6450 Handling and Use of Paper Media Configuration Tool (Windows) 4 Once the calibration target is registered in the printer, click the Next button in the Execute create calibration target dialog box. 5 The Confirm Update dialog box is displayed. Confirm the update and click the Execute button. • If creating the calibration target fails, Target not registered is displayed in Color Calibration in the Add and Edit Note Custom Paper dialog box. If creating the calibration target fails, it might be able to be created by changing the environment where the printer is located. Warnings Take note of the following warnings when added custom paper other than Canon genuine paper and feed confirmed paper to the printer driver and the printer itself. About the Cutter • Depending on the paper, there are types that cannot be cut by the cutter unit, and types that speed deterioration of the blade and cause damage to the cutter. For thick paper, hard paper, etc. do not use the cutter unit, and instead 602 cut the roll paper using scissors, etc. after printing. In this case, select User Cut as the Automatic Cutting Settings in the Roll Paper Settings dialog box. User's Guide