Canon imagePROGRAF iPF6450 User Guide - Page 671

iPF6450 System Setup Setting Item Keep Paper Size TrimEdge Reload Rep.P.head Print Nozzle Check Use RemoteUI Reset PaprSetngs Erase HDD Data High Speed Secure High Spd. Secure Output Method Print Print (Auto Del) Save: Box XX Print After Recv User's Guide Menu Settings Description, Instructions Choose Off to give priority to margin settings. The larger value is used if the margin specified in the printer driver does not match the margin in the printer menu. Control Panel Specify whether to trim the leading edge of the currently retracted roll when the roll is advanced. Cut the edge if you are concerned about any marks left on the roll when the roll is left in the retracted position. Specify On to have rolls cut when printing begins after Sleep mode or when the power is restored. Selecting Automatic will trim the edge when the roll has been in the retracted position for two days or more. Printer Menu Choose On to have the printer automatically execute the Advanced Adj. operations after you replace the Printhead. (See "Automatic Adjustment to Straighten Lines and Colors.") →P.796 In Frequency, specify the timing for automatic checks of nozzle clogging. Choose Standard to have the printer adjust the timing for checks based on the frequency of nozzle use. Choose 1 page to check once per page. Select Warning > On to display warnings if the nozzles clog during printing. Choosing Off prohibits access from RemoteUI. Settings can only be configured from the control panel. Restores settings that you have changed with Media Configuration Tool to the default values. Erases file management data for print job data stored on the printer's hard disk. (See "Erasing Data on the Printer's Hard Disk.") →P.689 Overwrites the entire hard disk with random data. (See "Erasing Data on the Printer's Hard Disk.") →P.689 Overwrites the entire hard disk with 00, FF, and random data (one time each). Verification is performed to check if the data was correctly written. (See "Erasing Data on the Printer's Hard Disk.") →P.689 Select the printing method for jobs received from software oth- er than the printer driver. When using the printer driver, config- ure settings on the printer. To print as usual, select Print. Selecting Print (Auto Del) will print the job and then delete the data from the printer's hard disk. Selecting Save: Box 01 will only save the print job in the box, without printing it. A setting for jobs received from software other than the printer 671 driver. When using the printer driver, configure settings on the printer. Select On to print the job after it has been saved.