Canon imagePROGRAF iPF830 MFP M40 User Guide - Page 336
Changing the Type of Paper
View all Canon imagePROGRAF iPF830 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 336 highlights
Handling and Use of Paper Changing the Type of Paper ManageRemainRoll On Barcodes Not printed Printer Operation After the Paper is Fed A menu for selection of the type and length of paper is shown on the Display Screen. Press ▲ or ▼ to select the type and length of paper loaded, and then press the OK button. iPF830 • Cut the edge of the roll using the Paper Cutting function if the edge is creased or soiled. (See "Specify- Important ing the Cutting Method for Rolls.") ➔P.344 • For details on types of paper to select, see the Paper Reference Guide. (See "Displaying the Paper Note Reference Guide.") ➔P.323 • Adjusting the printhead alignment with the type of paper to be used in printing may enhance printing quali- ty. (See "Automatic Adjustment to Straighten Lines and Colors.") ➔P.550 Changing the Type of Paper Follow these steps to change the type of paper specified on the printer after you have loaded paper. If you will continue using this type of paper later, selecting Keep Paper Type > On will save the time and effort of configuring the media type setting when you load the paper again. The current media type settings before you select On will be automatically selected at that time. (See "Using the Same Type of Paper Regularly.") ➔P.337 • For best printing results, the printer fine-tunes the print head height and the feed amount for each type of paper. Important Be sure to select the type of paper to use correctly before printing. • Because the printer fine-tunes the feed amount for each type of paper, the margins and the size of printed im- ages may vary depending on the type of paper used. If margins and the size of images are not as you expected, adjust the paper feed amount. (See "Adjusting the Feed Amount.") ➔P.558 • Rolls and sheets have different printing areas, and sheets having a larger bottom margin than rolls. (See "Print Area.") ➔P.661 Changing the Type of Paper • When you load a roll, a menu for selection of the type of paper is shown on the Display Screen. Select the type of Note paper, and then press the OK button. If no barcode has been printed on the roll and you have set ManageRemainRoll to On, specify the roll length after the type of paper. (See "Specifying the Paper Length.") ➔P.337 1 On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Paper tab ( ). Handling rolls • If the Tab Selection screen is not displayed, press the Menu button. Note 2 Press the OK button. The Paper Menu is displayed. 336 3 Press ▲ or ▼ to select Chg. Paper Type, and then press the OK button. 4 Press ▲ or ▼ to select the type of paper loaded ( Roll Paper or Cut Sheet ), and then press the OK button. User's Guide