Canon imagePROGRAF iPF830 MFP M40 User Guide - Page 468

Media Take-up Unit(Optional) iPF830 c Basket Arm R and Basket Arm L Holds the Basket Rod (tag side) attached to the Output Stacker. When the Output Stacker is not used, push it down and store it next to the Stand Leg. d Basket Rod (tag side) and Basket Rod (cord side) Holds the cloth Output Stacker securely in specific positions. e Basket Rod Keeps Basket Arm R and Basket Arm L at the same angle. f Rear Holder Holds the middle of the Basket Rod (cord side). (See "Using the Stationary Output Stacker.") ➔P.359 • The printer can be used with either a Stationary Output Stacker or a separate, mobile Wheeled Output Stacker. Note The Stationary Output Stacker is normally provided as the standard stacker, but the Wheeled Output Stacker may be the standard stacker in some sales regions. If the Wheeled Output Stacker has been provided as the standard stacker, the Stationary Output Stacker is not included. For more information about the Wheeled Output Stacker, see "Wheeled Output Stacker." ➔P.362 Media Take-up Unit(Optional) Main Unit d Printer Parts Printer parts a b c e a Left Media Take-up Unit Load the Rewind Spool here. b Right Media Take-up Unit Load the Rewind Spool here. Includes the Media Take-up Unit Power button, ▲ and ▼ buttons to advance or rewind paper, and a power cord. c Rewind Spool Winds documents printed on rolls. d 3-inch Adapter When rewinding rolls with 3-inch paper cores, attach the adapter to the Rewind Spool. e Media Take-up Sensor 468 A sensor for automatically rewinding rolls. User's Guide