Canon imagePROGRAF iPF830 MFP M40 User Guide - Page 366
Enabling Roll Take-Up, Adhesive Synthetic Paper
View all Canon imagePROGRAF iPF830 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 366 highlights
Handling and Use of Paper Enabling Roll Take-Up iPF830 • The Media Take-up Unit cannot be used with sheets. Important • If you have attached the Output Stacker, always stow it before using the Media Take-up Unit. (See "Stowing the Stationary Output Stacker.") ➔P.360 • Position the Basket Cloth and Basket Rod so they do not interfere with the Media Take-up Sensor. This may impair operation. (See "Stowing the Stationary Output Stacker.") ➔P.360 • Rolls are not cut automatically when the Media Take-up Unit is used, regardless of the Cutting Mode setting in the printer menu or the Automatic Cutting setting in the printer driver. However, you can cut paper by pressing the Cut button. • Color tones after printing may change during the ink drying period for some types of paper. Allow ample drying time before the final check of colors, and do not remove printed documents from the Media Take-up Unit too soon. • In humid environments, documents printed using plenty of ink on relatively insubstantial media such as light- weight Canon Coated Paper may not be retracted evenly by the unit. In this case, take steps to control humidity in the operating environment, or adjust the Roll DryingTime setting so that printed documents are retracted after the ink has fully dried. • In humid environments, documents printed on Fabric Banner or Adhesive Synthetic Paper may not be retrac- ted evenly by the unit. In this case, take steps to control humidity in the operating environment, or adjust the Roll DryingTime setting so that printed documents are retracted after the ink has fully dried. Enabling Roll Take-Up 1 On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Settings/Adj. tab ( ). Media take-up unit • If the Tab Selection screen is not displayed, press the Menu button. Note 2 Press the OK button. The Set./Adj. Menu is displayed. 3 Press ▲ or ▼ to select Take-up Reel, and then press the OK button. 4 Press ▲ or ▼ to select Use Take-up Reel, and then press the OK button. 5 Press ▲ or ▼ to select Enable, and then press the OK button. Disabling Roll Take-Up 1 Press the Cut button. 2 Press ▲ or ▼ to select Yes, and then press the OK button. 366 The mode now switches from take-up mode to regular mode. • The printer will also switch from take-up mode to regular mode if you lift the Release Lever and cut the roll Note with scissors instead of pressing the Cut button. User's Guide