Canon imagePROGRAF iPF830 MFP M40 User Guide - Page 643
This paper cannot be used as size is not supported., Roll printing is selected.
View all Canon imagePROGRAF iPF830 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 643 highlights
iPF830 This paper cannot be used as size is not supported. This paper cannot be used as size is not supported. Cause Paper that is too large for the printer has been loaded. Paper that is too small for the printer has been loaded. Paper has been loaded that is too small to print the test pattern for printhead adjustment or nozzle checking. Corrective Action Lift the Release Lever and load paper of the correct size. (See "Paper Sizes.") ➔P.320 Lift the Release Lever and load paper of the correct size. (See "Paper Sizes.") ➔P.320 Lift the Release Lever and load unused paper A4/Letter (vertical) or larger. More than one sheet may be required depending on the adjustment. Roll printing is selected. Cause You have attempted to print on a roll, but no roll is loaded. Corrective Action Press ▲ or ▼ to select "Load Roll Paper", and then press the OK button. Load the roll, and then print. (See "Attaching the Roll Holder to Rolls.") ➔P.330 (See "Loading Rolls in the Printer.") ➔P.333 Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing. Roll printing is selected, but sheets are loaded. Cause A print job for rolls was received when a sheet is loaded. Corrective Action Follow these steps to load and print on a roll. 1. Press ▲ or ▼ to select Eject Cut Sheet, press the OK button, and remove the sheet. (See "Removing Sheets.") ➔P.357 2. Load a new roll. (See "Loading Rolls in the Printer.") ➔P.333 The printer now starts printing the print job. Press ▲ or ▼ to select Stop Printing, and then press the OK button. Error Message Messages regarding paper The roll is empty. Cause The tailing edge of the paper was detected because cut sheets were loaded in the roll paper Paper Feed Slot. Corrective Action Follow these steps to install the roll paper. 1. Press the OK button and remove the paper. 2. Load the new roll. (See "Attaching the Roll Holder to Rolls.") ➔P.330 (See "Loading Rolls in the Printer.") ➔P.333 3. If no barcode was printed on the roll, specify the type of paper. (See "Changing the Type of Paper.") ➔P.336 4. If no barcode was printed on the roll, specify the paper length. (See "Specifying the Paper Length.") ➔P.337 5. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK button. Printing will resume, starting from the page on which the error occurred. "Lift the release lever and replace the roll." The roll is empty. Cause Corrective Action 643 Follow these steps to replace the used roll with a new roll of the same type and size. 1. Lift the Release Lever and remove the roll. (See "Removing the Roll from the Printer.") ➔P.338 (See "Removing the Roll Holder from Rolls.") ➔P.340 2. Load the new roll. User's Guide