Canon imagePROGRAF iPF830 MFP M40 User Guide - Page 425

iPF830 Control Panel Display Printer status and modes The printer has the following status. Standby The printer is ready to receive jobs sent from the computer. Jobs sent from the computer are printed immediately. Printing Paused Printing is paused on the printer. Any jobs sent from the computer are held without being printed. Control Panel Operations and Display Screen Printing Sleep Off The printer is printing a print job. When a print job is received from the computer, printing starts after the currently printing print job has printed. The time left until printing is finished is indicated in the upper-right corner in the middle line of the display (values exceeding 10 hours are not shown). The job name and the information about the paper of the currently printing job appear at the bottom line of the display. The printer is in power-saving mode. The printer automatically enters Sleep mode to conserve power when idle for a specific period (by default, five minutes), that is, if no print jobs are received or buttons are pressed while all covers are closed. You can specify the period before the printer enters Sleep mode in the Sleep Timer menu. (See "Menu Settings.") ➔P.442 After entering Sleep mode from Standby mode, the printer automatically recovers if print jobs are received, and the jobs are printed. The printer is not on. If no operations are performed on the printer for the duration of the time set in Shut Down Timer after entering Sleep mode, the printer automatically turns off. (See "Menu Settings.") ➔P.442 Error No ink left. Replace ink tank. OK The printer requires your attention. Any jobs sent from the computer cannot be processed. The tab related to the error is displayed. 425 For information about the display in the case of multiple errors, see "Display Transitions in Error Sta- tus." C M Y M B K B K User's Guide