Canon imagePROGRAF iPF830 MFP M40 User Guide - Page 630
HP-GL/2 problems, With HP-GL/2, printing is misaligned
View all Canon imagePROGRAF iPF830 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 630 highlights
With HP-GL/2, printing is misaligned HP-GL/2 problems iPF830 With HP-GL/2, printing is misaligned ...630 Lines or images are missing in printed HP-GL/2 jobs 630 Lines are printed too thick or thin in HP-GL/2 print jobs 630 HP-GL/2 jobs are printed in monochrome (or color 630 Printed colors of lines are inaccurate during HP-GL/2 printing 631 HP-GL/2 jobs are printed 6 mm larger than specified 631 HP-GL/2 jobs are printed at maximum size, even if a standard size is specified 631 HP-GL/2 printing takes a long time ...631 The printer stops when printing a HP-GL/2 job (the carriage stops moving 631 With HP-GL/2, printing is misaligned Cause The plotter origin is incorrect. The Margin setting in the Control Panel menu is incorrect. Corrective Action Check the printing commands. Set Detect img size to Command priority or Detected size in the Control Panel menu. (See "Menu Settings.") ➔P.442 Adjust the Margin setting values in the Control Panel menu. (See "Menu Settings.") ➔P.442 Troubleshooting Lines or images are missing in printed HP-GL/2 jobs. The memory is full. Cause An HP-GL/2 command not supported by this printer was received. The printer has received print data that includes HP RTL commands when Auto Rotate is On in the Control Panel menu. The plotter origin is incorrect. Oversize in the Control Panel menu is set to Off. Corrective Action Check the size of the data in the print job. Check the print job and settings. In the Control Panel, set Auto Rotate to Off and print again. (See "Menu Settings.") ➔P.442 Set Detect img size to Command priority or Detected size in the Control Panel menu. (See "Menu Settings.") ➔P.442 Set Oversize to On in the Control Panel menu. (See "Menu Settings.") ➔P.442 HP-GL/2 problems Lines are printed too thick or thin in HP-GL/2 print jobs Cause Corrective Action The Width setting in the Control Panel menu Change the Width setting configured in Pen no. of the Palette A or Palette B selec- is incorrect. ted in the Control Panel menu. (See "Menu Settings.") ➔P.442 ThickenFineLines in the Control Panel menu is set to Off. If fine lines are printed faintly, setting ThickenFineLines to On will print the lines more distinctly. (See "Menu Settings.") ➔P.442 The Ln wdth correct setting in the Control Change the Ln wdth correct setting in the Control Panel menu. Panel menu is incorrect. (See "Menu Settings.") ➔P.442 630 HP-GL/2 jobs are printed in monochrome (or color) Cause The Color Mode setting in the Control Panel menu is incorrect. Corrective Action Check the Color Mode setting in the Control Panel menu. (See "Menu Settings.") ➔P.442 However, for optimal Printhead performance, the printer consumes trace amounts of color ink even when Monochrome is selected as Color Mode. User's Guide