Canon imagePROGRAF iPF830 MFP M40 User Guide - Page 642
Paper size not detected., Insufficient paper for job, Fit Roll Paper
View all Canon imagePROGRAF iPF830 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 642 highlights
Paper size not detected. iPF830 Cause When Detect Mismatch in the Control Panel menu is set to Pause or Hold Job, the width of the loaded roll does not match the width specified in Fit Roll Paper Width in the printer driver. Corrective Action 1. Press ▲ or ▼ to select Change Paper, and then press the OK button. (See "Removing the Roll from the Printer.") ➔P.338 (See "Removing the Roll Holder from Rolls.") ➔P.340 2. Replace with paper of the width configured in the printer driver. (See "Attaching the Roll Holder to Rolls.") ➔P.330 (See "Loading Rolls in the Printer.") ➔P.333 The printer now starts printing the print job. Make sure the roll width selected in the dialog box displayed when you select Fit Roll Paper Width in the printer driver matches the width of the roll loaded in the printer, and then try printing again. Paper size not detected. Cause Paper has been loaded askew, or warped paper has been loaded. Because the Platen is soiled with ink or other substances, the size of the clear film cannot be detected. Corrective Action Lift up the Release Lever and reload the paper. (See "Loading Rolls in the Printer.") ➔P.333 (See "Loading Sheets in the Printer.") ➔P.353 If "Not finished printing. Finish printing remaining jobs?" is displayed on the Display Screen, press the OK button. Printing will resume, starting from the page on which the error occurred. If this error recurs after you reload the roll, remove the Roll Holder from the printer, push the roll firmly in until it touches the Roll Holder flange, and reload the Roll Holder in the printer. (See "Attaching the Roll Holder to Rolls.") ➔P.330 Open the Top Cover and clean the entire Platen. (See "Cleaning Inside the Top Cover.") ➔P.591 Error Message Messages regarding paper Insufficient paper for job Cause Corrective Action The printer has received a print job longer than the amount of roll paper left when ManageRemainRoll in the Control Panel menu is On. Press ▲ or ▼ to select Print, and then press the OK button to resume printing. However, the roll paper may run out during the print job and you may not be able to print all of the document. Press ▲ or ▼ to select Change Paper, and then press the OK button to stop printing. (See "Removing the Roll from the Print- er.") ➔P.338 (See "Loading Rolls in the Print- 642 er.") ➔P.333 Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing. User's Guide