Canon imagePROGRAF iPF830 MFP M40 User Guide - Page 641
The paper is too small., PaprWidth Mismatch, Replace paper with A4/LTR vertical or larger
View all Canon imagePROGRAF iPF830 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 641 highlights
iPF830 The paper is too small. Cause When Detect Mismatch in the Control Panel menu is set to Pause, the type of paper loaded does not match the type specified in the printer driver. Corrective Action 1. Press ▲ or ▼ to select Change Paper, and then press the OK button. 2. Replace the loaded paper with paper of the type and size you have specified in the printer driver. (See "Loading and Printing on Rolls.") ➔P.18 (See "Loading and Printing on Sheets.") ➔P.20 Press ▲ or ▼ to select Print, and then press the OK button to resume printing. However, note that this error may cause paper jams and affect the printing quality. The paper is too small. Cause When Detect Mismatch in the Control Panel menu is set to Pause or Hold Job, paper smaller than the size specified in the printer driver is loaded. Corrective Action Press ▲ or ▼ to select Print, and then press the OK button to resume printing. However, note that this error may cause paper jams and affect the printing quality. Adjust the paper size setting in the printer driver to match the size loaded in the printer as follows. 1. Press ▲ or ▼ to select Stop Printing, and then press the OK button. 2. Change the paper size setting in the printer driver to the size loaded in the printer and try printing again. Replace the loaded paper with paper of a size that matches the size setting in the printer driver as follows. When Detect Mismatch in the Control Panel menu is set to Warning, paper smaller than the size specified in the printer driver is loaded. 1. Press ▲ or ▼ to select Change Paper, and then press the OK button to stop printing. 2. Replace the loaded paper to match the settings in the printer driver and try printing again. (See "Loading and Printing on Rolls.") ➔P.18 (See "Loading and Printing on Sheets.") ➔P.20 You can continue to print, but note that this error may cause problems in the printing results. Error Message The paper is too small. Messages regarding paper "Replace paper with A4/LTR (vertical) or larger" Cause The loaded paper is too small. (When you have attempted to print a test print sheet or other printer status information.) Corrective Action Replace the paper with paper of A4/Letter (vertical) size or larger as follows. 1. Press ▲ or ▼ to select Change Paper, press the OK button, and remove the paper. (See "Removing Sheets.") ➔P.357 2. Switch to paper A4/Letter (vertical) or larger. (See "Loading and Printing on Sheets.") ➔P.20 The printer will resume printing. Press ▲ or ▼ to select Stop Printing, and then press the OK button. PaprWidth Mismatch Cause Corrective Action When Detect Mismatch in the Control Panel menu is Press ▲ or ▼ to select Print, and then press the OK button to resume 641 set to Pause or Hold Job, the width of the loaded roll printing. does not match the width specified in Fit Roll Paper However, note that this error may cause paper jams and affect the printing Width in the printer driver. quality. Press ▲ or ▼ to select Stop Printing, and then press the OK button. Follow these steps to replace the roll to match the width specified in the printer driver. User's Guide