Canon imagePROGRAF iPF830 MFP M40 User Guide - Page 368

Loading the Rewind Spool on the Media Take-up Unit 3 When rewinding rolls with 3-inch paper cores, insert the 3inch Adapter on the flanges at both ends. iPF830 Handling and Use of Paper 4 Insert the paper core, which serves as the spindle for rewinding a roll, on the Rewind Spool. Media take-up unit • Definitely load the same size of paper core in the Rewind Spool as that of the roll to be rewound. Using Important a paper core of a different size may cause rewinding problems. 5 Push the flanges in firmly until the paper core is secured in place and push down the lever (a) toward the shaft. a • After the flange is pressed strongly, confirm that the paper core does not move. If you can hold and Important move the paper core leftward and rightward and there is clearance between the flange and paper core, repeat procedures 2 to 4. If there is clearance, a rewinding problem may result. 6 Load the Rewind Spool on the Media Take-up Unit so that the gear of the Rewind Spool (a) meshes with the gear of the Right Media Take-up Unit (b). 368 b OFF ON a • If the gear of the Rewind Spool (a) does not mesh with the gear of the Right Media Take-up Unit (b), the Important Media Take-up Unit cannot be turned on. User's Guide