Canon imagePROGRAF iPF830 MFP M40 User Guide - Page 452
Print After Recv, Save: Box XX
View all Canon imagePROGRAF iPF830 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 452 highlights
Control Panel Menu Settings System Setup Setting Item CarriageScanWdth Use USB Use Ethernet Use RemoteUI Reset PaprSetngs Erase HDD Data High Speed Secure High Spd. Secure Output Method Print Print (Auto Del) Save: Box XX Print After Recv Common Box Set. Show Job Log Printer Menu Take-up Use Take-up Reel Reel Auto Feed Skip Take-Up Err 452 Prep.MovePrinter Admin. Change Password Menu iPF830 Description, Instructions Specify the scan width of the carriage during printing. Select Automatic for movement equivalent to the width of paper loaded. Selecting Fixed will reduce any soiling on the back of the paper, although printing may take a little longer. When Off is selected, the device can no longer be accessed via USB. When Off is selected, the device can no longer be accessed via Ethernet. Choosing Off prohibits access from RemoteUI. Settings can only be configured from the control panel. Restores settings that you have changed with Media Configuration Tool to the default values. Erases file management data for print job data stored on the printer's hard disk. (See "Erasing Data on the Printer's Hard Disk.") ➔P.472 Overwrites the entire hard disk with random data. (See "Erasing Data on the Printer's Hard Disk.") ➔P.472 Overwrites the entire hard disk with 00, FF, and random data (one time each). Verification is performed to check if the data was correctly written. (See "Erasing Data on the Printer's Hard Disk.") ➔P.472 Select the printing method for jobs received from software other than the printer driver. When using the printer driver, configure settings on the printer. To print as usual, select Print. Selecting Print (Auto Del) will print the job and then delete the data from the printer's hard disk. Selecting Save: Box 01 will only save the print job in the box, without printing it. A setting for jobs received from software other than the printer driver. When using the printer driver, configure settings on the printer. Select On to print the job after it has been saved. Select Print (Auto Del) to print without saving jobs in the box shared among multiple users. Selecting Off prevents display of the log in Job Menu > Job Log. Additionally, the log is not printed if you choose Job Menu > Print Job Log. Note that because job logs are not collected, the Status Monitor accounting functions will not work correctly. Selecting Enable allows use of the Media Take-up Unit. Available only if Use Take-up Reel is already set to Enable. Rolls are automatically advanced to the position for attachment to the Rewind Spool. Available only if Use Take-up Reel is already set to Enable. Choose On to continue with printing even if an error occurs with the Media Take-up Unit. Choose Off to pause printing if a take-up error occurs. When transferring the printer to another location, choose the level of transfer and follow the instructions on the screen. (See "Preparing to Transfer the Printer.") ➔P.594 Not displayed during a warning message that the remaining Maintenance Cartridge capacity is low. The password that can be entered is a number from 0 to 9999999. User's Guide