Canon imagePROGRAF iPF830 MFP M40 User Guide - Page 647

iPF830 Turn on the media take-up unit. Cause The Take-up Reel setting in the printer Set./Adj. Menu was changed from Enable to Disable, but a print job was received before the roll was removed. Corrective Action The mode switches from take-up mode to regular mode after you change the Take-up Reel setting in the Set./Adj. Menu from Enable to Disable and lift the Release Lever to remove a roll, or after you execute Paper Cutting. Press ▲ or ▼ to select Print, and then press the OK button to resume printing. Turn on the media take-up unit. Cause The Take-up Reel setting in the control panel menu was changed to Enable while the power to the Take-up Reel was off and the Roll Media lamp on the control panel was lit. Corrective Action Turn the Media Take-up Unit on. The Take-up Reel setting in the control panel menu changes to Disable. Error Message Borderless printng not possible. Cause The print job received specifies a type or width of paper that is not compatible with borderless printing. The loaded paper is a size not compatible with borderless printing. Because paper expands or contracts depending on the environment of use, it may become narrower or wider than the supported width for borderless printing. Corrective Action Follow these steps to change the settings of the print job to enable borderless printing. 1. Press ▲ or ▼ to select Stop Printing, and then press the OK button. 2. Make sure the correct printer driver for the printer is selected and try printing again. For information on types of paper compatible with borderless printing, refer to the Paper Reference Guide. (See "Displaying the Paper Reference Guide.") ➔P.323 Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing. The document will be printed with a border. Press ▲ or ▼ to select Stop Printing, and then press the OK button. Replace the paper with paper compatible for borderless printing as follows. 1. Press ▲ or ▼ to select Change Paper, and then press the OK button. (See "Removing the Roll from the Printer.") ➔P.338 (See "Removing the Roll Holder from Rolls.") ➔P.340 2. Replace the paper with paper compatible for borderless printing. (See "Attaching the Roll Holder to Rolls.") ➔P.330 (See "Loading Rolls in the Printer.") ➔P.333 The printer now starts printing the print job. For information on types of paper compatible with borderless printing, refer to the Paper Reference Guide. (See "Displaying the Paper Reference Guide.") ➔P.323 Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing. The document will be printed with a border. Use each type of paper only where the recommended environmental conditions are met. For details on environmental conditions for various paper, see the Paper Reference Guide. (See "Displaying the Paper Reference Guide.") ➔P.323 Messages regarding paper Paper position not suitable for borderless printing. Cause Corrective Action Because paper expands or con- Press ▲ or ▼ to select Stop Printing, and then press the OK button. 647 tracts depending on the environ- Use each type of paper only where the recommended environmental conditions are met. For de- ment of use, it may become nar- tails on environmental conditions for various paper, see the Paper Reference Guide. rower or wider than the suppor- (See "Displaying the Paper Reference Guide.") ➔P.323 ted width for borderless printing. The paper is loaded askew. Press ▲ or ▼ to select Change Paper and straighten the paper so that the edges are between the ink grooves for borderless printing. Insert the roll firmly until it touches the flange of the Roll Holder. User's Guide