Cisco 5510 Getting Started Guide - Page 197

Chapter 14 Configuring the CSC SSM Scenario: Security Appliance with CSC SSM Deployed for Content Security Step 13 Step 14 Step 15 Step 16 Step 17 Step 18 Step 19 Step 20 Choose the interface from the drop-down list. Available options are global (all interfaces), inside, management, and ssm management. Choose the source of network traffic from the IPv4 Network Objects list, and click OK. To specify the destination of network traffic for the CSC to scan, click the ellipses to display the Browse Destination dialog box. Choose the destination of network traffic from the IPv4 Network Objects list, and click OK. To specify the type of service for the CSC to scan, click the ellipses to display the Browse Service dialog box. Choose the service(s) from the list, and click OK. Enter a description for the network traffic that you want the CSC to scan in the field provided. To specify whether or not to allow the CSC to scan network traffic if it fails, do the following: • To allow traffic through without being scanned, click Permit. • To prevent traffic from going through without being scanned, click Deny. • To save your settings, click OK. The added traffic details appear on the Traffic Selection for CSC Scan screen. • To discard these settings and return to the Traffic Selection for CSC Scan screen, click Cancel. If you click Cancel, ASDM displays a dialog box to confirm your decision. 78-19186-01 Cisco ASA 5500 Series Getting Started Guide 14-15