Cisco 7609-S Installation Guide - Page 61

Step 1, Step 2, Step 3, Step 4 - supervisor engine

Get Cisco 7609-S PDF manuals and user guides View all Cisco 7609-S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 61 highlights

Chapter 3 Installing the Cisco 7609 Internet Router Attaching the Interface Cables To connect a terminal using a Catalyst 5000 family Supervisor Engine III console cable, perform these steps: Step 1 Step 2 Step 3 Step 4 Place the console port mode switch in the out position. Connect to the port using the Supervisor Engine III cable and the appropriate adapter for the terminal connection. Position the cable in the cable guide (if installed). Make sure there are no sharp bends in the cable. Check the terminal documentation to determine the baud rate. The baud rate of the terminal must match the default baud rate (9600 baud) of the console port. Set up the terminal as follows: • 9600 baud • 8 data bits • No parity • 2 stop bits To connect a modem to the console port, perform these steps: Step 1 Step 2 Step 3 Place the console port mode switch in the in position. Connect to the port using the RJ-45-to-RJ-45 rollover cable and the RJ-45-to-DB-25 DCE adapter (labeled "Modem"). Position the cable in the cable guide (if installed). Make sure there are no sharp bends in the cable. OL-5079-04 Cisco 7609 Internet Router Installation Guide 3-17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
3-17
Cisco 7609 Internet Router Installation Guide
OL-5079-04
Chapter 3
Installing the Cisco 7609 Internet Router
Attaching the Interface Cables
To connect a terminal using a Catalyst 5000 family Supervisor Engine III console
cable, perform these steps:
Step 1
Place the console port mode switch in the
out
position.
Step 2
Connect to the port using the Supervisor Engine III cable and the appropriate
adapter for the terminal connection.
Step 3
Position the cable in the cable guide (if installed). Make sure there are no sharp
bends in the cable.
Step 4
Check the terminal documentation to determine the baud rate. The baud rate of
the terminal must match the default baud rate (9600 baud) of the console port. Set
up the terminal as follows:
•
9600 baud
•
8 data bits
•
No parity
•
2 stop bits
To connect a modem to the console port, perform these steps:
Step 1
Place the console port mode switch in the
in
position.
Step 2
Connect to the port using the RJ-45-to-RJ-45 rollover cable and the
RJ-45-to-DB-25 DCE adapter (labeled “Modem”).
Step 3
Position the cable in the cable guide (if installed). Make sure there are no sharp
bends in the cable.