Cisco 7906G Administration Guide - Page 206

Network Configuration Chapter 8 Monitoring the Cisco Unified IP Phone Remotely Table 8-2 Network Configuration Area Items (continued) Item Description Auto Line Select Enabled Indicates whether the phone shifts the call focus to incoming calls on all lines. DSCP for Call Control DSCP IP classification for call control signaling. DSCP for Configuration DSCP IP classification for any phone configuration transfer. DSCP for Services DSCP IP classification for phone-based services. Security Mode Displays the security mode that is set for the phone. Web Access Enabled Indicates whether web access is enabled (Yes) or disabled (No) for the phone. Span to PC Port (applies to 7911G Indicates whether the phone will forward packets transmitted and only) received on the network port to the access port. PC VLAN (applies to 7911G only) VLAN used to identify and remove 802.1P/Q tags from packets sent to the PC. CDP: PC Port (applies to 7911G only) Indicates whether CDP is enabled on the PC port (default is enabled). LLDP: PC Port Indicates whether Link Layer Discovery Protocol (LLDP) is enabled on the PC port. LLDP-MED: SW Port Indicates whether Link Layer Discovery Protocol Media Endpoint Discovery (LLDP-MED) is enabled on the switch port. LLDP Power Priority Advertises the phone's power priority to the switch, enabling the switch to appropriately provide power to the phones. Settings include: • Unknown-default • Low • High • Critical LLDP Asset ID Identifies the asset ID assigned to the phone for inventory management. 8-10 Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.1 OL-14585-01