Cisco 7906G Administration Guide - Page 62

Understanding the Phone Startup Process Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network If you configure security-related settings in Cisco Unified Communications Manager Administration, the phone configuration file will contain sensitive information. To ensure the privacy of a configuration file, you must configure it for encryption. For more information, refer to the "Configuring Encrypted Phone Configuration Files" chapter in Cisco Unified Communications Manager Security Guide. SIP Dial Rules For Cisco Unified IP Phones running under SIP, the administrator uses dial rules to configure SIP phone dial plans. These dial plans must be associated with a SIP phone device to enable dial plans to be sent to the configuration file. If the administrator does not configure a SIP phone dial plan, the phone does not display any indication of a dial plan. In this case, you must press the Dial softkey, unless the phone supports key press markup language (KPML). For more information on configuring SIP dial rules, refer to the Cisco Unified Communications Manager Administration Guide. Understanding the Phone Startup Process When connecting to the VoIP network, the Cisco IP Phone goes through a standard startup process, as described in Table 2-3. Depending on your specific network configuration, not all of these steps may occur on your Cisco Unified IP Phone. Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.1 2-8 OL-14585-01