Cisco AIR-AP1020 Quick Start Guide - Page 14

Collecting Required Tools and Supplies Installation and Configuration Collecting Required Tools and Supplies This section describes the tools and information that you should have before installing the access point. • One Cisco Aironet 1000 Series lightweight access point per location. • Cisco Aironet 1000 Series lightweight access point Mounting Kits, factory-supplied with each Cisco Aironet 1000 Series lightweight access point. • Optional Cisco Aironet 1000 Series lightweight access point Mounting Kits, factory-orderable. • Optional AC-to-DC external power supplies, factory-orderable. Note that this option requires the power cable to be run through the plenum in a metal conduit to meet safety requirements. • Map showing Cisco Aironet 1000 Series lightweight access point locations and mounting and power options. • Screwdrivers, drills, and ladder. • An assortment of sheet metal and drywall screws and toggle bolts. • CAT-5 (or higher) cables to connect the Cisco Aironet 1000 Series lightweight access point locations and other network devices. • Optional Kensington MicroSaver Security Cable to secure each Cisco Aironet 1000 Series lightweight access point. Continue with "Pre-Installation Configuration. AP1020/1030 Cisco Aironet 1000 Series IEEE 802.11a/b/g Lightweight Access Points with External Antennas - Quick Start Guide 78-17147-01 4