Cisco AIR-AP1020 Quick Start Guide - Page 27
Clipping the Cisco Aironet 1000 Series Lightweight Access Point and Ceiling-Mount
UPC - 882658025952
View all Cisco AIR-AP1020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Installation and Configuration Mounting the Cisco Aironet 1000 Series Lightweight Access Points Figure 10 Clipping the Cisco Aironet 1000 Series Lightweight Access Point and Ceiling-Mount Clips to a Hanging-Ceiling Rail 135674 4. Attach the cables to the sides of the Cisco Aironet 1000 Series lightweight access point. Note • Be sure the cables are routed away from the Cisco Aironet 1000 Series lightweight access point antennas. • When the Cisco Aironet 1000 Series lightweight access point is powered up and is associated with a Cisco Wireless LAN Controller (Green/Power and Yellow/802.11b/g and/or Yellow or Amber/802.11a LEDs lit), the Cisco Aironet 1000 Series lightweight access point is broadcasting its beacon signal(s). When this happens, complete the installation as quickly as possible to remove yourself from within 8 in.(20 cm) of the Cisco Aironet 1000 Series lightweight access point to comply with FCC RF radiation exposure guidelines. You have installed the Cisco Aironet 1000 Series lightweight access point. Repeat "Mounting the Cisco Aironet 1000 Series Lightweight Access Points" for each Cisco Aironet 1000 Series lightweight access point location, and then continue with "Returning MAC Information." AP1020/1030 Cisco Aironet 1000 Series IEEE 802.11a/b/g Lightweight Access Points with External Antennas - Quick Start Guide 78-17147-01 17