Cisco AIR-AP1210 Hardware Installation Guide - Page 118
Overview, Console Port Signals and Pinouts
UPC - 746320804330
View all Cisco AIR-AP1210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Overview Appendix E Console Cable Pinouts Overview The access point requires a special serial cable that connects the access point serial console port (RJ-45 connector) to your PC's COM port (DB-9 connector). This cable can be purchased from Cisco (part number AIR-CONCAB1200) or can be built using the pinouts in this appendix. Console Port Signals and Pinouts Use the console RJ-45 to DB-9 serial cable to connect the access point's console port to the COM port of your PC running a terminal emulation program. Note Both the Ethernet and console ports use RJ-45 connectors. Be careful to avoid accidently connecting the serial cable to the Ethernet port connector. Table E-1 lists the signals and pinouts for the console RJ-45 to DB-9 serial cable. Table E-1 Signals and Pinouts for a Console RJ-45 to DB-9 Serial Cable Console Port PC COM Port RJ-45 Pins Signals1, 2, 3, 4 DB-9 Pins Signals1, 2, 3, 4 1 NC -- 2 NC -- 3 TXD 2 RXD 4 GND 5 GND 5 GND 5 GND 6 RXD 3 TXD 7 NC -- 8 NC -- 1. NC indicates not connected. 2. TXD indicates transmit data. 3. GND indicates ground. 4. RXD indicates receive data. Cisco Aironet 1200 Series Access Point Hardware Installation Guide E-2 OL-4310-01