Cisco AIR-AP1210 Hardware Installation Guide - Page 46
Using the Web-Browser Interface for the First Time, Using the Management s in the Web-Browser
UPC - 746320804330
View all Cisco AIR-AP1210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Using the Web-Browser Interface for the First Time Chapter 4 Using the Web-Browser Interface Using the Web-Browser Interface for the First Time Use the access point's IP address to browse to the management system. See the "Obtaining and Assigning an IP Address" section on page 3-3 for instructions on assigning an IP address to the access point. Follow these steps to begin using the web-browser interface: Step 1 Step 2 Start the browser. Enter the access point's IP address in the browser Location field (Netscape Communicator) or Address field (Internet Explorer) and press Enter. The Summary Status page appears. Using the Management Pages in the Web-Browser Interface The system management pages use consistent techniques to present and save configuration information. A navigation bar is on the left side of the page, and configuration action buttons appear at the bottom. You use the navigation bar to browse to other management pages, and you use the configuration action buttons to save or cancel changes to the configuration. Note Changes are applied only when you click Apply. It's important to remember that clicking your browser's Back button returns you to the previous page without saving any changes you have made. Clicking Cancel cancels any changes you made on the page and keeps you on that page. Figure 4-1 shows the web-browser interface home page. Cisco Aironet 1200 Series Access Point Hardware Installation Guide 4-2 OL-4310-01