Cisco AIR-AP1210 Hardware Installation Guide - Page 71
Removing a 2.4-GHz Radio
![]() |
UPC - 746320804330
View all Cisco AIR-AP1210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Chapter 7 2.4-GHz Radio Upgrade Removing a 2.4-GHz Radio Step 3 Remove the antenna wires from the blank spacer card. Caution To avoid damaging the antenna wire assemblies, handle them by their connectors. Step 4 Remove the blank spacer card from the mini-PCI connector. For instructions on installing the radio card, go to the "Installing a 2.4-GHz Radio" section. Removing a 2.4-GHz Radio To remove a 2.4-GHz radio card from your access point, follow these steps: Caution The internal access point components and the 2.4-GHz radio can be damaged by ESD from improper handling. Step 1 Use your fingers to carefully remove the antenna wire connectors from the 2.4-GHz radio card. Caution The antenna connectors can be damaged by using a pair of long-nose pliers during the removal process. Caution To avoid damaging the antenna wire assemblies, handle them by their connectors. OL-4310-01 Cisco Aironet 1200 Series Access Point Hardware Installation Guide 7-5
![](/manual_guide/products/cisco-airap1210-hardware-installation-guide-088c3e1/71.png)