Cisco AIR-AP1210 Hardware Installation Guide - Page 4
Installing the Access Point, Configuring the Access Point for the First Time - power over ethernet
UPC - 746320804330
View all Cisco AIR-AP1210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Contents 2 C H A P T E R 3 C H A P T E R Installing the Access Point 2-1 Safety Information 2-2 FCC Safety Compliance Statement 2-2 General Safety Guidelines 2-2 Warnings 2-2 Unpacking the Access Point 2-3 Package Contents 2-3 Basic Installation Guidelines 2-3 Installation Above Suspended Ceilings 2-3 Before Beginning the Installation 2-4 Installation Summary 2-5 Connecting the 2.4-GHz Antennas 2-5 Connecting the Ethernet and Power Cables 2-6 Connecting to an Ethernet Network with an Inline Power Source 2-7 Connecting to an Ethernet Network with Local Power 2-7 Powering Up the Access Point 2-8 Configuring the Access Point for the First Time 3-1 Before You Start 3-2 Resetting the Access Point to Default Settings 3-2 Obtaining and Assigning an IP Address 3-3 Connecting to the Access Point Locally 3-3 Assigning Basic Settings 3-4 Default Settings on the Express Setup Page 3-8 Protecting Your Wireless LAN 3-8 Using the IP Setup Utility 3-9 Obtaining and Installing IPSU 3-9 Using IPSU to Find the Access Point's IP Address 3-10 Using IPSU to Set the Access Point's IP Address and SSID 3-11 Assigning an IP Address Using the CLI 3-12 Using a Telnet Session to Access the CLI 3-12 Cisco Aironet 1200 Series Access Point Hardware Installation Guide iv OL-4310-01