Cisco CP-7937G Administration Guide - Page 53
Applications, Settings, Network Configuration, Admin. VLAN ID, Validate, TFTP Server 1, Select
View all Cisco CP-7937G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Chapter 4 Configuring Settings on the Conference Station Network Configuration Menu Table 4-3 Network Configuration Menu Options (continued) Option Operational VLAN ID Admin. VLAN ID TFTP Server 1 TFTP Server 2 Description To Change Auxiliary Virtual Local Area Network (VLAN) configured on a Cisco Catalyst switch in which the conference station is a member. The conference station obtains its Operational VLAN ID via Cisco Discovery Protocol (CDP) from the switch to which the conference station is attached. To assign a VLAN ID manually, use the Admin VLAN ID option. If the conference station has not received an auxiliary VLAN, this option indicates the Admin. VLAN. If neither the auxiliary VLAN nor the Administrative VLAN are configured, this option is blank. Auxiliary VLAN in which the conference station is a member. 1. Unlock network configuration options. For more information, see the "Unlocking and Locking Options" section on page 4-3. Used only if the conference station does not receive an auxiliary VLAN from the switch. 2. Choose Applications > Settings > Network Configuration > Admin. VLAN ID. 3. Enter a new Admin. VLAN ID. 4. Press Validate, and then press Save. Primary Trivial File Transfer 1. If DHCP is enabled, set the Alternate TFTP option to Yes. For Protocol (TFTP) server used by the more information, see the Alternate TFTP option in this table. conference station. If you are not 2. Choose Applications > Settings > Network Configuration > using DHCP in your network and TFTP Server 1. you want to change this server, you must use the TFTP Server 1 option. 3. Enter a new TFTP server IP address. If you set the Alternate TFTP option to yes, you must enter a non-zero value for the TFTP Server 1 option. 4. Press Validate, and then press Save. Optional backup TFTP server that the conference station uses if the primary TFTP server is unavailable. 1. Unlock network configuration options. For more information, see the "Unlocking and Locking Options" section on page 4-3. 2. Enter an IP address for the TFTP Server 1 option. For more information, see the TFTP Server 1 option in this table. 3. Choose Applications > Settings > Network Configuration. 4. Choose the TFTP Server 2 option, and then press Select. 5. Enter a new backup TFTP server IP address. 6. Press Validate, and then press Save. Cisco Unified IP Conference Station 7937G Administration Guide for Cisco Unified Communications Manager 6.0 OL-11560-01 Rev. B0 4-7