Cisco WBPN User Guide - Page 21
Viewing Status Information, Using the WBPN Wireless-N Bridge for Phone Adapters Configuration Utility - firmware
View all Cisco WBPN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Using the WBPN Wireless-N Bridge for Phone Adapters Configuration Utility Viewing Status Information 2 When you finish making changes on a configuration page, click Apply (labeled #3 in Figure1) to save the changes. Click Reset (labeled #4 in Figure1), Clear, or Cancel to undo your changes. Viewing Status Information The WBPN provides information about its status, including system information and statistics. System Information The following system information is provided: Firmware Version Build Time Serial Number HW_Rev PID VID Firmware version that is installed on the WBPN. Date and time that the firmware was built. Unique serial number of the WBPN unit. Hardware version number. Product ID and version identifier of the WBPN. Wired Network Information The following wired network information is provided: IP Address Subnet Mask Default Gateway MAC Address Send Packets IP address of the WBPN. Subnet mask of the WBPN IP address. The node that the network software uses when an IP address does not match any other routes in the routing table. Hardware address of the wired (Ethernet) interface on the WBPN. Packets that have been transmitted over the Ethernet interface from the WBPN to the network. Cisco WBPN User Guide 21