Cisco WBPN User Guide - Page 5

1 Installing the WBPN Wireless-N Bridge for Phone Adapters This chapter describes how to install and initially configure your WBPN Wireless-N Bridge for Phone Adapters. It contains the following sections: • Before You Begin, page 5 • Getting to Know the WBPN, page 6 • Connecting the WBPN Using WPS, page 8 • Connecting the WBPN Using a PC, page 9 • Installing the WBPN Into the SPA Phone Stand, page 16 Before You Begin Before you begin the installation, make sure that you have the following equipment and information: • Power Supply for your Small Business IP Phone (not included) • PC to use the web-based system management tools to configure the WBPN (required if you are not using Wi-Fi Protected Setup). The web-based configuration manager is supported on Microsoft Internet Explorer (version 8 or higher) and Mozilla Firefox (version 3.6.3 and higher). Using the WBPN With the Cisco SPA525G/525G2 You can use the WBPN with the Cisco SPA525G/525G2 IP phone to improve the wireless performance of the phone. You must first disable the internal Wireless-G controller on the Cisco SPA525G in order to use the WBPN as your wireless controller. To disable the phone's internal wireless: Cisco WBPN User Guide 5