Cisco WRV200 User Guide - Page 62
Appendix G: Specifications, Appendix G, Specifications - reset
UPC - 745883570577
View all Cisco WRV200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Appendix G Specifications Appendix G: Specifications Specifications Model WRV200 Standards IEEE802.11g, IEEE802.11b, IEEE802.3, IEEE802.3u, 802.1x (Security Authentication), 802.11i-Ready (Security WPA2), 802.11e-Ready (Wireless QoS) Ports One Power port (12V 1A), Four 10/100 RJ-45 LAN ports, One 10/100 RJ-45 Internet port Buttons Reset Cabling Type UTP CAT 5 LEDs Power, DMZ, Wireless, Internet, LAN 1-4 Operating System Performance Linux NAT Throughput 93 Mbps IPSec Throughput 23 Mbps (3DES) Setup/Config User Interface Built-in Web UI for easy browser-based configuration (HTTP/HTTPS) Management SNMP Version SNMP version 1, 2c Event Logging Local, Syslog, E-mail Firmware Upgrade Firmware Upgradable Through Web Browser Diagnostics Flash, RAM, LAN, WLAN Wireless Spec/Modulation Radio and Modulation Type: 802.11b/DSSS, 802.11g/ODFM Supported Data Rates 802.11b: 1, 2, 5.5, 11 Mbps 802.11g: 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps Operating Channels 11 North America, 13 Most of Europe (ETSI and Japan) External Antennae 2 Omnidirectional Antenna connector type Fixed Transmit Power Transmit Power (adjustable) @ Normal Temp Range: 802.11.g: -18 dBm (typical); 802.11.b: -20 dBm (typical) Wireless-G VPN Router with RangeBooster Adjustable Power Antenna Gain Receiver Sensitivity Wireless QoS Security Features 802.1X RADIUS Auth. Access Control Firewall DoS Secure Management Network VLAN Support SSID Broadcast Multiple SSID Wireless VLAN Map WDS DMZ Host PPPoE ALG Support VPN Tunnels Encryption Authentication NAT Traversal Yes 2 dBi 802.11.g: 54 Mbps @ -69 dBm (typical), 802.11.b: 11 Mbps @ -82 dBM (typical) WMM. 802.11e-ready 802.1x - RADIUS (MD5, SHA1, TLS, TTLS, PEAP) Dynamically Varying Encryption Access Control List (ACL) Capability: MAC-based and IP-based SPI Stateful Packet Inspection Firewall Denial of Service Prevention HTTPS, Username/Password 4 LAN Ports and 4 SSIDs can be mapped to up to 5 VLANs SSID Broadcast Enable/Disable Supports Multiple BSSIDs (4) which can operate on pre-defined schedules Supports SSID-to-VLAN Mapping with Wireless Client Isolation Allows Wireless Signals to be Repeated by up to 3 Repeaters A LAN PC can be configured as a DMZ Host Dual PPPoE User Profiles SIP, FTP, PPTP, L2TP, IPSec 10 IPSec Tunnels with QuickVPN support 3DES/AES Encryption MD5/SHA1 Authentication IPSec 57