Cisco WVC80N User Guide - Page 38
Set Motion Detection Settings, Return, All group settings or one group setting is returned as below - cgi commands
View all Cisco WVC80N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Appendix D CGI Commands Return: All group settings or one group setting is returned as below: HTTP/1.0 200 OK\r\n ... content-type: text/plain \r\n ... \r\n [MOTION] md_mode=[0|1] \r\n md_point=X,Y\r\n md_switch1=[0|1] \r\n md_name1=Window_1 \r\n md_window1=X1, Y1, X2, Y2 \r\n md_threshold1=125 \r\n md_switch2=[0|1] \r\n md_name2=Window_2 \r\n md_window2=X1, Y1, X2, Y2 \r\n md_threshold2=125 \r\n md_switch3=[0|1] \r\n md_name3=Window_3 \r\n md_window3=X1, Y1, X2, Y2 \r\n md_threshold3=125 \r\n md_switch4=[0|1] \r\n md_name4=Window_4 \r\n md_window4=X1, Y1, X2, Y2 \r\n md_threshold4=125 \r\n \r\n ← 0=Off, 1=On ← 0=Off, 1=On ← 12 ASCII characters ← Relative to 640x480 resolution ← Threshold: 0 ~ 255 Set Motion Detection Settings Method: GET URL: http:///adm/set_group.cgi?group=MOTION&=... (Please refer to Set Group Parameters command.) Parameter md_mode md_point md_switch1 ... md_switch4 Value and description Motion detection 0 = Off 1 = On The position of motion under PT mode Format: X,Y Range: X = -63 to 63 (by model) Y = -36 to 28 (by model) Motion detection window 0 = Off 1 = On Wireless-N Internet Home Monitoring Camera 37