Compaq Armada m700 Compaq Armada M700 Series of Personal Computers Reference G - Page 110

Selecting a Country-Specific Modem Configuration The internal modem is configured to meet operating approval in the country where you purchased your computer. To set the modem to comply with telecommunications standards and regulations in other countries, you must change the country selection setting. To confirm that the modem has been approved for use by the telecommunications agency in the desired country, check the modem agency approvals label on the bottom of the computer. Or, for the most up-to-date approval information, refer to the Compaq website at http://www.compaq.com. Viewing the Current Country Selection s In Windows 95, Windows 98, or Windows NT 4.0, select Start!Settings!Control Panel!Modems!Dialing Properties. The current country selection displays in the I Am In box. s In Windows 2000 Professional-Select Start!Settings! Control Panel!Phone and Modems Options, then select the Dialing Properties tab. On the Locations drop-down list, select the location from which you are dialing, then select the Edit button. The current country selection displays in the Country/region box. Changing the Country Selection NOTE: If you select a country that is not supported by the internal modem, a warning will appear. Unless you then select a supported country, the country selection will default to USA. s In Windows 95, Windows 98, or Windows NT 4.0, Select Start!Settings! Control Panel!Modems!Dialing Properties. Then select the new country from the drop-down list in the I Am In box. 7-8 Using an Internal Modem