Compaq Armada m700 Compaq Armada M700 Series of Personal Computers Reference G - Page 33
Enabling the Keypad at Startup, Save Changes and Exit
View all Compaq Armada m700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Enabling the Keypad at Startup To set the computer to start up with the embedded numeric keypad enabled- 1. Turn on or restart the computer, then press F10 when the blinking cursor appears upper-right on the screen. ❏ To change the language, press F2. ❏ For navigation instructions, press F1. 2. Select Advanced!Device Options, then press Enter. 3. Toggle on the Num Lock State at Boot field, then press F10. 4. To save your preferences, then close Computer Setup and restart the computer, select File!Save Changes and Exit, then press Enter. 5. When prompted to confirm your action, press F10. To disable the embedded numeric keypad at startup- Repeat the above procedure, toggling off the Num Lock State at Boot field. NOTE: The embedded numeric keypad can be enabled or disabled with Fn+Num Lk in either startup state. 2-14 Using the Keyboard