Compaq Presario 1800 Presario 1800XL Series Maintenance and Service Guide - Page 60
Display, Problem, Probable Cause, Solutions, with Fn+F7 or Fn+F8.
View all Compaq Presario 1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Presario 1800 Series Models: XL180, XL181, XL182, XL183, XL184, XL185, and XL190, XL191, XL192 Display (Continued) Problem Backlight (brightness) cannot be adjusted with Fn+F7 or Fn+F8. Probable Cause Improper display cable connections. Solution(s) 1. Reseat the display cable to the system board. 2. Replace the display assembly. Defective inverter board. Replace the display assembly. This display panel has a continuous pattern across it (e.g., "jailbars" pattern), has a single color on it, or has garbled graphics across the entire panel. This failure is for patterns across the entire panel (not just on one section). Defective display cable. Defective system board. Improper display cable connections Defective display cable. Defective inverter board. Defective system board. Replace the display assembly. Replace the system board. Reseat the display cable to the following until the problem is solved: 1. System board 2. Display assembly Replace the display assembly. Replace the display assembly. Replace the system board. A single line, small group of lines, or block appears on the display panel. This failure occurs in only a section of the display panel. Defective display panel. Replace the display assembly. Note: When you perform a "self-test" on an external VGA color or monochrome monitor, the screen should be white. A narrow black border may also appear on the left and right sides of the display. Either of these displays indicates that the monitor is working properly. PRESARIO NOTEBOOK MAINTENANCE AND SERVICE GUIDE 1800 SERIES TROUBLESHOOTING 25