Compaq Presario 1800 Presario 1800XL Series Maintenance and Service Guide - Page 70
Tool and Software Requirements, Screws, Connectors and Plastic Parts, Torx T-8 screwdriver - disassembly
View all Compaq Presario 1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Presario 1800 Series Models: XL180, XL181, XL182, XL183, XL185, and XL190, XL191, XL192 Tool and Software Requirements The following items are required to service the Notebook: • Torx T-8 screwdriver • 5mm nut drivers (for screwlocks and standoffs) • Small standard screwdriver • Small Phillips screwdriver • Diagnostics software Screws The screws used in the Notebook are not interchangeable. If an incorrect screw is used during the reassembly process, it can damage the unit. Compaq strongly recommends that all screws removed during disassembly be kept with the part that was removed, then returned to their proper locations. Connectors and Plastic Parts Plastic parts can be damaged by the use of excessive force during disassembly and reassembly. When handling plastic parts, use care. Apply pressure only at the points designated in the instructions. 2 REMOVAL AND REPLACEMENT PRESARIO NOTEBOOK MAINTENANCE AND SERVICE GUIDE 1800 SERIES