Compaq ProLiant 5000 ProLiant Server Troubleshooting Guide - Page 135
Initiating the Operating System, Table 5-3, System Configuration Utility Settings for Initiating
View all Compaq ProLiant 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Error Recovery Initiating the Operating System Initiating the operating system is only supported on systems that use the System Configuration Utility. When you enable ASR-2 to restart the operating system and a critical error occurs, ASR-2 logs the error in the IML and restarts the server. The system then executes the normal restart process. IMPORTANT: When you enable ASR-2 to restart the operating system, Modem Dial-In Status, Network Status, and Modem Dial-Out Status are automatically disabled. In this mode you cannot access the server and the server cannot dial out to a remote workstation. During the recovery process, the ASR-2 feature tries (up to ten times) to restart the server. If the ASR-2 feature cannot restart the server within ten attempts, it logs a critical error in the IML, restarts the server in Diagnostics, and puts the modem into auto-answer mode. Your System Configuration Utility settings should resemble those listed in Table 5-3 when you enable ASR-2 to restart into the operating system: Table 5-3: System Configuration Utility Settings for Initiating the Operating System Option Serial interface Dial-in status Dial-out status Dial-out string Network status Network protocol Network controller Network host name Network card slot Network frame type Settings COM1 Disabled Disabled 555-1234 Disabled IPX HP HP_Server Slot # ETHERNET_II continued 5-14 HP Servers Troubleshooting Guide