Compaq ProLiant 5000 ProLiant Server Troubleshooting Guide - Page 215
System switch SW2.1, the server setup utility
View all Compaq ProLiant 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 215 highlights
POST Error Messages Table C-9: 800 Series POST Error Messages continued Error Code Audible Beeps Probable Source of Problem 807-The password has been cleared. Please power off and restore the clear password switch (SW2.1) None The system switch SW2.1 has been turned on and the system configuration password has been cleared. System switch SW2.1 must be returned to the default off position for normal operation and to set a password with the server setup utility. 807-The Setup password is cleared. Please power off and restore the clear password switch (SW1.1) None The system board configuration switch SW1.1 has been turned on and the system configuration password has been cleared. SW1.1 must be returned to the default off position for normal operation and the ability to set a password with the server setup utility. Action 1. Remove power from the system. 2. Locate the system switch SW2.1. Check your serverspecific user documentation for the location of this switch. 3. Return system switch SW2.1 to the off position. 4. Restart the system. 5. Press the F9 key and use the server setup utility to set a new password, if desired. 1. Remove power from the system. 2. Locate the system board configuration switch. 3. Return SW1.1 to the off position. 4. Restart the system. 5. Press the F10 key and use the server setup utility to set a new password. HP Servers Troubleshooting Guide C-35