Craftsman 22124 Owners Manual - Page 9

AVAILABLE ACCESSORIES Visit your Sears Hardware Department or see the Sears Power and Hand Tool Catalog for the following accessories. ITEM STOCK NUMBER * Miter Gauge Extension & Stop 29879 * Stock Clamp, Miter Gauge * Table Insert - Standard 29880 29882 * Table Insert - Dado 29885 * Table Insert - Molding Cutterhead * Saw Blade - Leitz; lO-in, x 40 tooth variable pitch blade * Fence Guide System 29887 29888 32371 Sears may recommend other accessories not listed in this manual. See your nearest Sears Hardware Department or Sears Power and Hand Tool Catalog for other accessories. Do not use any accessory unless you have completely read the Owner's Manual for that accessory. Use only accessories recommended for this table saw. Using other accessories may cause serious injury and cause damage to the table saw. Fig. 2A CONSTRUCTING A FEATHERBOARD 24" I' 5" 'I Figure 2A illustrates dimensions for making a typical featherboard. The material, which the featherboard is constructed of, should be straight piece of wood that is free of knots and cracks. Featherboards are used to keep the work in contact with the fence and table and help prevent kickbacks. Clamp the featherboard to the fence and table so that the leading edge of the featherboard will support the workpiece until the cut is completed. Fig. 2B Use featherboards for all non-through cutting operations where the guard and splitter assembly must be removed. Always replace the guard and splitter assembly when the non-through cutting operations are finished. See figure 2B.