D-Link 3350SR Reference Manual - Page 130
Specifies the, maximum number of packets the above
UPC - 790069254499
View all D-Link 3350SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config scheduling specified. This number is then multiplied by 16 ms to determine the maximum latency. For example, if 3 is specified, the maximum latency allowed will be 3 X 16 = 48 ms. When the specified hardware priority queue has been waiting to transmit packets for this amount of time, the current queue will finish transmitting its current packet, and then allow the hardware priority queue whose max_latency timer has expired to begin transmitting packets. Parameters − This specifies which of the four hardware priority queues the config scheduling command will apply to. The four hardware priority queues are identified by number − from 0 to 3 − with the 0 queue being the lowest priority. max_packet − Specifies the maximum number of packets the above specified hardware priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its packets. A value between 0 and 255 can be specified. max_latency − Specifies the maximum amount of time the above specified hardware priority queue will be allowed to transmit packets before allowing the next lowest hardware priority queue to begin transmitting its packets. A value between 0 and 255 can be specified − with this value multiplied by 16 ms to arrive at 130