D-Link 3350SR Reference Manual - Page 195

DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Command: delete iproute default Success. local> show iproute Purpose Used to display the switch's current IP routing table. Syntax show iproute {} {static|rip|ospf} Description This command will display the switch's current IP routing table. Parameters − IP address and netmask of the IP interface that is the destination of the route. You can specify the address and mask information using the traditional format (for example, 10.1.2.3/255.0.0.0 or in CIDR format, 10.1.2.3/16). static − This displays the content of the IP routing table that is created by the user. rip − This displays the content of the IP routing table that is learned from the RIP protocol. ospf − This displays the content of the IP routing table that is learned from the OSPF protocol. 195