D-Link 3350SR Reference Manual - Page 270
config bootp_relay add, config bootp_relay add ipif <ipif_name, 12> <ipaddr>
UPC - 790069254499
View all D-Link 3350SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 270 highlights
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config bootp_relay add Purpose Used to add an IP destination address to the switch's BOOTP relay table. Syntax config bootp_relay add ipif Description This command adds an IP address as a destination to forward (relay) BOOTP packets to. Parameters − The name of the IP interface which contains the IP address below. − The IP interface that is trying to add the BOOTP protocol packet. Restrictions Only administrator-level users can issue this command. Example Usage: To add a BOOTP relay: local>config bootp_relay add ipif System 10.43.21.12 Command: config bootp_relay add ipif System 10.43.21.12 Success. local> 270
DES-3350SR Layer 3 Fast Ethernet Switch User’s Guide
270
config bootp_relay add
Purpose
Used to add an IP destination address to the
switch’s BOOTP relay table.
Syntax
config bootp_relay add ipif <ipif_name
12> <ipaddr>
Description
This command adds an IP address as a
destination
to
forward
(relay)
BOOTP
packets to.
Parameters
<ipif_name 12>
−
The name of the IP
interface which contains the IP address
below.
<ipaddr>
−
The IP interface that is trying to
add the BOOTP protocol packet.
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To add a BOOTP relay:
local>config bootp_relay add ipif System 10.43.21.12
Command: config bootp_relay add ipif System 10.43.21.12
Success.
local>