D-Link 3350SR Reference Manual - Page 356
config sntp
UPC - 790069254499
View all D-Link 3350SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 356 highlights
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config sntp Syntax config sntp Description This command is used to configure SNTP on the switch. Parameters primary − This is the primary server the SNTP information will be taken from. − The IP address of the primary server. secondary − This is the secondary server the SNTP information will be taken from in the event the primary server is unavailable. − The IP address for the secondary server. poll-interval − This is the time the SNTP information will be polled. − The polling interval ranges from 30 to 99,999 seconds. Restrictions Only administrator-level users can issue this command. Example Usage: To configure SNTP for the primary server for a switch: 356
DES-3350SR Layer 3 Fast Ethernet Switch User’s Guide
356
config sntp
Syntax
config sntp
Description
This command is used to configure SNTP
on the switch.
Parameters
primary
−
This is the primary server the
SNTP information will be taken from.
<ipaddr>
−
The IP address of the primary
server.
secondary
−
This is the secondary server
the SNTP information will be taken from in
the event the primary server is unavailable.
<ipaddr>
−
The
IP
address
for
the
secondary server.
poll-interval
−
This is the time the SNTP
information will be polled.
<int 30-99999>
−
The polling interval
ranges from 30 to 99,999 seconds.
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To configure SNTP for the primary server for a switch: