D-Link 3350SR Reference Manual - Page 335
create ospf aggregation, the OSPF Area.
UPC - 790069254499
View all D-Link 3350SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 335 highlights
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide create ospf aggregation Description This command is used to create an OSPF area aggregation. Parameters − A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. − The 32-bit number in the form of an IP address that uniquely identifies the network that corresponds to the OSPF Area. lsdb_type [summary] − The type of address aggregation. advertise [enabled|disabled] − Allows for the advertisement trigger to be enabled or disabled. Restrictions Only administrator-level users can issue this command. Usage Example To create an OSPF area aggregation: local>create ospf aggregation 10.1.1.1 10.48.76.122/16 lsdb_type summary advertise enabled Command: create ospf aggregation 10.1.1.1 10.48.76.122/16 lsdb_type summary advertise enabled Success. 335