D-Link 3350SR Reference Manual - Page 261
config access_profile, 7>|ethernet_type <hex 0x0
UPC - 790069254499
View all D-Link 3350SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 261 highlights
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config access_profile Purpose Syntax Used to configure an access profile on the switch and to define specific values that will be used to by the switch to determine if a given packet should be forwarded or filtered. Masks entered using the create access_profile command will be combined, using a logical AND operation, with the values the switch finds in the specified frame header fields. Specific values for the rules are entered using the config access_profile command, below. config access_profile profile_id [add access_id ] [ethernet {vlan |source_mac |destination_mac |802.1 |ethernet_type
DES-3350SR Layer 3 Fast Ethernet Switch User’s Guide
261
config access_profile
Purpose
Used to configure an access profile on the
switch and to define specific values that
will be used to by the switch to determine if
a given packet should be forwarded or
filtered. Masks entered using the create
access_profile
command will be combined,
using a logical AND operation, with the
values the switch finds in the specified
frame header fields.
Specific values for the
rules
are
entered
using
the
config
access_profile command, below.
Syntax
config access_profile profile_id <value 1-
255> [add access_id <value 1-255>]
[ethernet {vlan <vlan_name
32>|source_mac
<macaddr>|destination_mac
<macaddr>|802.1 <value 0-
7>|ethernet_type <hex 0x0-
0xffff}|ip{vlan <vlan_name>|source_ip
<ipaddr>|destination_ip <ipaddr>|dscp
<value 0-63>|[icmp {type <value 0-
65535> code <value 0-255>}|igmp {type
<value 0-255>}|tcp {src_port <value 0-
65535>|dst_port <value 0-65535>}| udp
{src_port <value 0-65535>|dst_port
<value 0-65535>}|protocol_id <value 0-
255> {user_define <hex 0x0-
0xffffffff>}]}]{priority <value 0-7>
{replace_priority}|replace_dscp <value 0-
63>}|delete <value 1-255>]
Description
The config access_profile
command is used