D-Link 3350SR Reference Manual - Page 163

DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local> show gvrp Purpose Syntax Description Parameters Used to display the GVRP status for a port list on the switch. show gvrp {} This command displays the GVRP status for a port list on the switch, including the PVID. The PVID is used by the port to tag outgoing, untagged packets, and to make filtering decisions about incoming packets. If the port is specified as tagging, and an untagged packet is forwarded to the port for transmission, the port will add an 802.1Q tag using the PVID to write the VID in the tag. When the packet arrives at its destination, the receiving device will use the PVID to make VLAN forwarding decisions. If a packet is received by the port, and Ingress Checking is enabled, the port will compare the VID of the incoming packet to its PVID. If the two are unequal, the port will drop the packet. If the two are equal, the port will receive and forward the packet. − Specifies a range of ports for which the GVRP status is to be displayed. The port list is specified by listing the beginning port number and the highest 163