D-Link 3350SR Reference Manual - Page 240
config 802.1x auth_parameter, force_unauth|auto|force_auth]
UPC - 790069254499
View all D-Link 3350SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 240 highlights
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config 802.1x auth_parameter Authentication parameters on a range of ports. The default parameter will return all ports in the specified range to their default 802.1x settings. Syntax config 802.1x auth_parameter ports [|all] [default|{direction [both|in]|port_control [force_unauth|auto|force_auth]| quiet_period | max_req |reauth_period |enable_reauth [enabled|disabled]}] Description The config 802.1x auth_parameter command is used to configure the 802.1x Authentication parameters on a range of ports. The default parameter will return all ports in the specified range to their default 802.1x settings. Parameters − Specifies a range of ports. The port list is specified by listing the lowest switch number and the beginning port number on that switch, separated by a colon. Then highest switch number, and the highest port number of the range (also separated by a colon) are specified. The beginning and end of the port list range are separated by a dash. For example, 3 would specify port 3. 4 specifies port 4. 3-4 specifies all of the ports between port 3 and port 4 − in numerical order. all − Specifies all of the ports on the switch. default − Returns all of the ports in the specified range to their 802.1x default settings. 240